• CDMA Cellular (US, Korea, and Japan), CDMA PCS (US and Korea) coverage in one instrument. • Built-in automatic test : 3 channels tests at a radio system and automatic handoff from among 3 radio system CDMA call processing functionality: Radio system support: IS-2000(US, Korea, and Japan), IS-95A (Cellr/IS95A), TSB-74 (Cellr/TSB74), ARIB T53 (Cellr/T53), J-STD-008 (PCS US, PCS Korea P0, and PCS Korea P1), IS-866 Handoff support: Softer handoff between two sectors A and B Hard handoff between any two RF channels Multi-mode hard handoff between Cellr/IS95A and PCS US, between Cellr/TSB74 and PCS US, and from IS-2000 to IS95A. Frequency Range 869MHz to 894MHz (Cellr/IS95A and Cellr/TSB74), 832MHz to 834MHz, 838MHz to 843MHz, 843MHz to 846MHz, and 860MHz to 870MHz (Cellr/T53), 1805MHz to 1870MHz (PCS Korea P0 and P1), 1930MHz to 1990MHz (PCS US) Accuracy Same as reference oscillator • Amplitude Range -110 dBm to -20 dBm Accuracy ± 1.0 dB at < = -50 dBm ± 2.0 dB at > -50 dBm Resolution 0.1 dB • CDMA modulation Type QPSK based on IS-95A, cdma2000 and 1xEV-DO Residual rho >=0.912 (typically >0.95) Data generation patterns PN9 for loopback, Single Byte Pattern for TDSO Power control bit Always up, Always down, Open loop • Input frequency range 824MHz to 849MHz (Cellr/IS95A and Cellr/TSB74), 887MHz to 889MHz, 893MHz to 898MHz, 898MHz to 901MHz, and 915MHz to 925MHz (Cellr/T53), 1715MHz to 1780MHz (PCS Korea P0 and P1), 1850MHz to 1910MHz (PCS US) • CDMA power measurement Range -60 dBm to +39 dBm Accuracy ±1 dB (typically ±0.6 dB) at >= 0 dBm ±2 dB (typically ±1.2 dB) at >=-40 dBm and < 0 dBm ±3 dB (typically ±1.8 dB) at < -40 dBm Resolution 0.2 dB • CDMA modulation measurement Input range -20 dBm to +39 dBm Modulation type OQPSK based on IS-95A HPSK based on cdma2000 RC3,4,1xEV-DO • Rho measurement Single Code Rho IS-95 and cdma2000 RC1,2 Multi Code Rho cdma2000 RC3,4,1xEV-DO Range 0.9 to 1.0 Accuracy ± 0.01 at >= 0.95 ± 0.02 at < 0.95 Resolution 0.001 • Frequency error measurement Range ± 10 kHz Accuracy ± (30 Hz + frequency reference accuracy) at average of 4 measurements Resolution 1 Hz • CDMA frame error rate measurement (loopback) Method Data loop back at full rate per service option 002 or Service Option 009 supporting confidence limits (95% or off) as outlined in TIA/EIA-98A Appendix A.1. Range 0 % to 100 % Resolution 0.00001 % Displayed results Measured FER, number of errors, number of frames tested, and one of the following: pass, fail, or --- (pass/fail not applicable) • CDMA frame error rate measurement (TDSO) Method Test Data Service Option per Service Option 32 supporting confidence limits (95 % or off) Range 0 % to 100 % • CDMA packet error rate measurement (1xEV-DO) Method PER1 FTAP : Forward Traffic channel Rate is 307.2kbps PER2 FTAP : Forward Traffic channel Rate is 2457.6kbps confidence limits (95% or off) Range 0 % to 100 % Range 3 VDC to 12 VDC at 0.1 VDC step , (Max. 1 A) Range 0 mA to 1000 mA in 1 mA Resolution Accuracy ±3 mA at <= 100 mA , ±30 mA at > 100 mA Maximum safe reverse power +41 dBm (12.6W, CW; supplemental characteristic) Impedance 50 ohm nominal, Input SWR : < 1.5:1 Connector N-type (f) Frequency 10 MHz Frequency accuracy ± [(Time since calibration x Aging rate) + Temperature effects + Accuracy of calibration] Aging rate ± 0.1 ppm per year Temperature stability ± 0.1 ppm at 0 °C to 40 °C Reference output level +3 dBm, 50 ohm, supplemental characteristic Reference input level 0 dBm to 10 dBm, 50 ohm, supplemental characteristic Connector BNC (f) connector Size 350(W)X150(H)X400(D) mm Weight < 15 kg Operating temperature 0 °C to +40 °C Storage temperature -20 °C to +60 °C Operating humidity 15 %RH to 95 %RH @ +40 °C Power 88 VAC to 264 VAC, 47 Hz to 63 Hz, < 250 VA Safety European Council Directive 73/23/EEC IEC 61010-1 : 1990+A1+A2 / EN 61010-1 : 1993+A2 CAN/CSA C22.2 No. 1010.1-92 EMC : European Council Directive 89/336/EEC EN 61326-1 : 1997 + A1 CISPR 11 : 1997+A1 / EN 55011 : 1998 Group 1, Class A Altitude < 2000 meters * Specifications may be subject to change without notice.