MF/HF RADIO EQUIPMENT JSS-2150 (NBDP Option)
Features Operation System Specs Brochure


Name MF/HF Radio Equipment
Model JSS-2150
IMO compliant
General
Display 3.8-inch, LED backlit, 320 by 240 pixels
Communication speed 57.6 kbps
Microphone input -54 dBm
Rated audio output speaker (8Ω): less than 5W, handset (150Ω): 1 mW or more
Frequency transmit 1605.0 to 27500.0 kHz (100 Hz steps)
Frequency receive 90.0 to 29999.9 kHz (100 Hz steps)
Emission type J3E, F1B, A1A, H3E, H2B, J2D
Channels up to 400 (20 ch x 20 groups)
ITU preset channels 1722 ch
Channel switching time less than 15 sec
Communication method push-to-talk (simplex, semi-duplex)
Antenna impedance 50Ω
Interface IEC61162-1 (GPS, RMS), NMEA0183
NMEA version 1.5, 2.0, 2.3
NMEA input GGA, GLL, RMC, GNS, ZDA
Power supply 21.6 to 31.2V DC
Power consumption 150W transmit: less than 30A, receive: less than 5A
Operating temperature -15 to 55°C (parts exposed to condensation -25 to 55°C)
Storage temperature -15 to 55°C (parts exposed to condensation -25 to 70°C)
Operating humidity 0% to 93% non-condensing
Protection rate IP22 (controller)
Transmitter
Antenna output power 1605.0 to 3999.9 kHz: 100Wpep
4000.0 to 27500.0 kHz: 150Wpep
Modulation method low-power stage balanced modulation
Occupied bandwidth J3E, J2D, H2B: within 3 kHz, F1B, A1A: within 0.5 kHz
Receiver
Receiving system double superheterodyne
Intermediate frequency 70.036 MHz, 36 kHz
Frequency stability within ±10 Hz
Sensitivity J3E: less than 2.5 uV, F1B: less than 0.7 uV, A1A: less than 1.4 uV
Clarifier variable range ±200 Hz (1 Hz steps)
Line output 0 dBm 600Ω (balanced)
Optional items
Power supply (AC/DC) NBD-2150
Battery charger NBB-724
Controller (max 2 in configuration) NCM-2150
Mounting bracket for controller (flush) MPBC42957
Mounting bracket for controller (table) MPBX44354
Connection box (for second controller) NQD-2250
NBDP option (max 2set) NDZ-227 + NDF-369 + NKG-800 + 7ZCJD0388 + 7ZCJD0419 + 7ZCSC0205A + 6JNKD00100B
Mounting bracket for data terminal (table) MPBP31721
Waterproof handset (IP66) NQW-261
Printer (wall, flush mount) NKG-911
Printer (desktop type) DPU-4141, NKG-800
Junction box (for antenna tuner) NQD-2253
JRC has several antenna solutions available   1As for this printer, use as the NBDP printer is not admitted.


Controller

Dimension:Controller NCM-2150
Handset

Dimension:Handset NQW-261


Transceiver

Dimension:Transceiver NTD-2150
Antenna tuner

Dimension:Antenna tuner NFC-2150


NBDP Option (Data Terminal Equipment, Keyboard, Printer)

Dimension:NBDP Option (Data Terminal Equipment, Keyboard, Printer) NDZ-227/NDF-369/NKG-800



WHAT'S STANDARD IN THE BOX
1. Controller²        
2. Handset   Which cables?    
3. Transceiver   Controller to Data terminal   5m
4. Antenna tuner   Antenna tuner to Transceiver   5m
5. Cabless        
6. Manual        


NBDP option
1. Data terminal³   Which cables?    
2. Keyboard   Controller to Data terminal(signal)   1.5m
3. Printer   Controller to Data terminal(Power)   2.3m
4. Cables   Data terminal to keyboard   1.7m
      Data terminal to printer(signal)   1.6m
2,3 excluding bracket   Transceiver to printer(Power)   4.0m

Communication Navigation Fishing


Copyright Japan Radio Co., Ltd. All Right Reserved
Contact Us Site Policy Back to Top