 |
|
| Model |
JLR-7500 |
JLR-7800 |
| IMO compliant |
 |
|
| General |
|
Display |
5.7-inch, white LED backlit, 320 by 240 pixels |
| Dimmer |
4 stages (bright, middle, dark, off) |
| Power supply |
10.8V to 31.2V AC, <10 W |
| Serial data in/out |
output: 4 ch (IEC61162-1), input: 1 ch |
| Contact signal in/out |
output: 2 ch, input 1 ch |
| LAN |
built-in 10/100 Mpbs |
| Data backup |
display: flash ROM, sensor: SRAM with battery |
| Waypoint |
10,000 points, event memory 1000 points, WPT name: 16 characters |
| Waypoint input |
LAT/LON, bearing/range, event, TD |
| WPT/route data transfer |
via LAN and RS-232C |
| Track/route |
2000 points, 100 routes with 512 WPT per route |
| Plot scale |
0.2, 0.5, 1.2, 5, 10, 20, 50, 100, 200, 300 NM |
| Plot interval |
1 up to 60 min (1 sec) or 0.01 to 99.99 NM (0.01 NM) |
| Navigation calculation |
select Great Circle and Rhumb line for each leg (total distance up to 99,999 nm) |
| Screen mode |
LAT/LON, CDI (highway), trackplot, GPS sat. info, enter WPT/route planning, WPT info |
| Alarms |
arrival, anchor, boundary, off-course, no position fix, speed, trip, 1) temperature, 1) depth, HDOP |
| Adjust magnetic variation |
auto or manual |
| Geodetic system |
46 systems |
| Units |
NM/KTS, kM/kPH, mi/miPH, m, ft, fm, °C or °F |
| LORAN C/A convert |
convert LAT/LON to TD of LORAN C/A |
| GPS specs |
|
Receiver/sensor type |
multichannel (12 ch), SBAS (1 ch) |
multichannel (12 ch), SBAS (1 ch), DGPS integrated |
| Frequency |
1575.42 MHz ±1 MHz (C/A code) |
| Satellite tracking |
up to 12 satellites |
| SBAS |
WAAS, MSAS, EGNOS |
| Accuracy |
13 m (HDOP <4 SA off), 7 m (SBAS) 2dRMS |
13 m (HDOP <4 SA off), 7 m (SBAS), 5 m (beacon) 2dRMS |
| Power supply |
10.8V to 31.2V AC, <1.5 W |
10.8V to 31.2V AC, <2.5 W |
| NMEA |
|
Version |
1.5, 2.1, 2.3 |
| Bit rate |
4800, 9600, 19200, 38400 |
| Output |
GGA, RMC, GLL, VTG, GSA, GSV, DTM, GBS, GRS, GST, ZDA, GNS, 2) MSS, ALR, 3) VDR, 3) VHW, APB, BOD, BWC, BWR, RMB, XTE, ZTG, AAM, ALR, RTE, WPL, ACK |
| Input |
HDT, THS, BDT, DPT, MTW, CUR, VBW, VHW, ACK, WPL, RTE ALR |
| Interval |
1, 2, 3, 4, 5, 6, 7, 8, 9 sec and off |
| Environment |
|
Operating temperature |
sensor -25° to 55°C, display -15° to 55°C |
| Storage temperature |
sensor -40° to 70°C, display -25° to 70°C |
| Operating humidity |
0% to 93% non-condensing |
| Water resistance |
sensor IEC60945 (ed.4), USCG CFR-46, display IP44 |
| Optional items |
| Rectifier |
NBG-320 |
| Printer (table mount) |
DPU-414 |
| Connection box |
CQD-10 |
| Data switching unit |
NCZ-777 |
| Junction box |
NQE-7700A |
| Extension cable (15 m) |
CFQ-9000 |
| 1) |
Via external temp sensor/echo sounder |
| 2) |
Only JLR-7800 |
| 3) |
Via external speed log/current meter |
| 1. Display¹ |
|
Which cables? |
|
Std. |
|
| 2. (D)GPS sensor |
|
Power cable display |
|
2 m |
|
| 3. Cables |
|
Sensor to display |
|
10 m |
(JLR-7500) |
| 4. Installation parts |
|
Sensor to display |
|
15 m |
(JLR-7800) |
| 5. Data connector |
|
Display to junction box |
|
5 m |
|
| 6. Spare parts |
|
|
|
|
|
| 7. Manual |
|
|
|
|
|
- Including bracket
All specifications are subject to change without notification.
|
|
|
JRC Europe
